Free laser cut generator

Family names crossword

Vector the cat, curious

Vector: Type your family names and I will cross them like a crossword. A heart tile links a name that shares no letter.

Laser cut crossword of one family’s names, made of letter tiles with the alphabet number in the corner: a hanging ornament or a table or wall sign with a line on top and a year. Choose what you make. Three ways to build it: engraved on one plate, on a smaller top plate, or with glued tiles and a template. Free for up to 4 names; CutCat Pro removes the name limit. Cut-ready SVG, DXF and LightBurn files, no sign-up.

What are you making

Family names

Want a picture as a tile inside a name? Click it to add it where the cursor is.
Icons: click one to put it into a name where the cursor is. An icon is one tile, it can end a name or sit inside it (ANNA + heart). Letters (accents work) and icons, 2 to 12 tiles each. Spaces and hyphens are dropped. Names cross at shared letters; a name with no common letter is joined by a link tile. The preview is free for any number of names.

Build

How is it made
mm
Link tile: the picture that joins a name sharing no letter with the others
Font

Size

mm

The tile size is worked out from the size of the piece.

mm
mm
· ·
Names
—
Grid · tile
—
Size
—
Pieces
—
Sheets
—
Free up to 4 names, no email needed.

Need something fancier?Ready-made laser cut designs in the shop, from $2.

How to use it

  1. Choose what you make, a ball, a keychain or a sign, then type the family’s names, one per line. The preview shows the crossword at once.
  2. Pick how it is built and the size. The tile size follows the size of the piece. A sign can carry a line on top and a year at the bottom.
  3. Download the SVG and open it in LightBurn, xTool Creative Space or the Glowforge app. Colours are operations: black = engrave, green = score, the others = cut. Engrave and score first, then cut.

The three ways to build it

  • Engraved plate: one piece. The tile frames (green score lines) and the letters (black engrave) go straight on the plate (red).
  • Top plate: a base (red) and a smaller top plate (blue) with the letters engraved on it. Glue the top plate inside the green outline on the base.
  • Glued tiles: a base (red), separate square tiles with engraved letters (blue) and a thin template with square windows (orange). Lay the template on the base with the edges level, glue the tiles into the windows, then lift the template off.

FAQ

Can I sell crosswords made from these files?

Yes. You can cut and sell the ornaments and signs you make, personal or commercial. You may not sell or share the generated files themselves as a design collection.

How many names are free?

Up to 4 names are free, for the ball, the keychain and the sign. The preview is free for any number of names. Files for more than 4 names need a CutCat Pro pass; that is the only difference.

How are the names laid out?

The names cross at shared letters, like a crossword. A name that shares no letter with the others is joined by a link tile (a heart, a star, a sun, a flower, a smile, a note or a sparkle, as you choose). If there is a better fit, the generator picks it for you; use the preview to check it.

What is the small number in the corner of a tile?

It is the position of the letter in the alphabet: A is 1, B is 2, Z is 26. Turn it off with the checkbox if you want plain letters.

Why does the template have a clearance setting?

The laser removes a thin line of material at every cut, so a cut window comes out slightly bigger than drawn and a cut tile slightly smaller. The clearance adds a little room so the tiles drop into the windows. Start with 0.2 mm per side and adjust after a test cut.

What sizes can I make?

The ball ornament comes in three common sizes (about 3, 4 and 4.7 inches) and the keychain in three (about 2.5, 3 and 4 inches), or any size you type. The sign comes in four common sizes, including a round one, or any size you type. The tile size is worked out from the size of the piece, and the page warns you if the tiles would be too small to cut.

Can I use letters with accents?

Yes. The Latin letters of the European languages work, for example Ä, Ñ, Ł and Č. Type them on your keyboard. Spaces, hyphens and dots in a name are dropped.

Which fonts can I use?

Eight fonts, all under the SIL Open Font License: Archivo Black, Alfa Slab One, Bungee, Bebas Neue, Baloo 2 ExtraBold, Playfair Display Black, Rubik Mono One and Righteous. The chunky ones engrave most cleanly on small tiles.

Which material and thickness should I use?

Anything that engraves well: plywood, alder, bamboo or coated acrylic. For the glued-tiles type use thin material for the template, for example 1.5 mm to 3 mm, so it is easy to lift off. The files do not depend on the material thickness.

Do I need an account?

No. The crossword is calculated on our server: it receives your names and the numbers of your settings, and nothing else (no files, no photos, no email). It does not store them. A quick human check (Cloudflare Turnstile) runs once per visit. A CutCat Pro pass is needed only for files with more than 4 names.

Which format should I choose?

SVG for LightBurn, xTool and Glowforge. DXF for CAD programs and older laser software. The .lbrn2 file for LightBurn comes with your own speed and power once you enter them in Advanced settings.