FreePro · counter display stands from plywood

Display stand generator

Tiered stands and pocket stands for your counter or craft-fair table. Tell it what you sell, add your shop name and cut it from plywood.

Vector, a curious cat

Vector: Tell me what goes on the shelves. I'll work out the steps. Cut: And I'll check that every part fits your sheet.

Units
Stand type
Material thickness
Size
Steps
Step size
Side shape
Top of the back wall

A shape above the sides for the back wall, like a sign.

Dividers
Front lip on the shelves

A strip along the front of every shelf, so cards and small items do not slide off.

Storage drawer

A drawer in the empty space under the steps, pulled out from the back. One drawer in each bay between the sides.

Entering a shop name hides the bottom logo.

Engraving fills the artwork. Scoring makes a light cut along the outlines. Your logo stays on your computer.

Drag to rotate · right-drag to move · scroll to zoom

Engrave or score the shop name and logo first (blue or green), cut the red holes next and the orange outlines last; check the order in your software preview. Cut one side and one shelf first and try the fit before you cut the rest.

How to use it

  1. Set the width of the stand and the number of steps, or switch to Fit my product and enter the size of one item and how many go in a row.
  2. Pick your material thickness. In Advanced settings enter the thickness you measured, your kerf and your sheet size.
  3. Type your shop name if you want it on the front, and pick engraving or a fast score.
  4. Check the sheet size, download SVG or DXF files and cut: the shop name and logo first (blue engraving or green score), red holes next, orange outlines last.

Putting it together

  • Push the tabs of the sides into the slots of the bottom panel.
  • Drop the risers onto the sides from above: their slots meet the slots in the steps of the sides.
  • Push the tabs of each front lip into the slots near the front of its shelf. On a pocket stand, push the dividers into the slots of the shelves the same way.
  • Slide each shelf in from the front, into the slots of the sides, until its back edge meets the riser behind it. On wide stands the tabs on the back edge go into the holes of that riser.
  • Everything holds by slots. A drop of glue makes it permanent; without glue it comes apart flat for the next fair.

FAQ

What is free and what is Pro?

The stand with the standard step, two steps and up to 350 mm wide is free, with your shop name. Wider stands, three to five steps, your own step size, Fit my product and your logo are Pro. The 3D view and the cut sheet are free to try for everything.

How big is the standard step?

Each step is 76 mm deep and 30.75 mm high, the same as in our best-selling tiered stand files.

When does the stand get a middle side?

When a shelf would span more than about 345 mm in 3 mm plywood. The generator adds sides on its own, so no shelf spans too far.

How does Fit my product work?

Enter the width, depth and height of one item and how many go in a row. The width comes from the items and the gaps between them, the step depth from the item depth, and the step height is about half the item height, so the back row shows over the front row.

What is the pocket stand for?

Bookmarks, business cards, stickers, postcards and greeting cards. Pick the item, how many pockets go in a row and how thick the pile is; the rows lean back so the cards rest on the wall behind them. Up to 2 rows of 4 pockets is free.

Can I put my logo on the stand?

Yes, with CutCat Pro. Add an SVG logo and place it on the front panel, on the shaped top of the back wall, or in both places. Turn off Shop name to use the front panel for your logo. You can engrave or score it. Convert any text in the logo to curves first; a white background in the file is left out. The file stays on your computer.

Which files do I get?

SVG and DXF files, laid out on sheets of the size you pick. If the parts need more than one sheet, you get a zip with one file per sheet.

What thickness can I use?

Plywood or MDF of 3 mm or 4 mm. Enter the thickness you measured in Advanced settings and every slot follows it.

Why do I need the kerf?

The laser burns away a thin line of wood. With the kerf entered, the slots come out at the size they should be, so the stand is neither loose nor too tight. Measure it with the Kerf test.

The parts are too tight or too loose. What do I change?

Change the fit clearance in Advanced settings. More clearance makes the slots wider. Cut one side and one shelf first and try them.

Can I sell stands I make with it?

Yes, you can sell the stands you cut. Do not sell or share the files themselves.

What is the storage drawer?

The space under the steps is empty, so the generator can fit a drawer there for spare stock, price tags or a card reader. It slides in from the back and has a cut-out for your finger. The drawer follows the steps in one or two levels, each at least 40 mm deep inside, so it closes the back without low, useless corners; Vector shows its inside size. It is part of CutCat Pro.

Do I need glue?

No, every part holds by slots. Glue makes it permanent; without glue the stand comes apart flat.