Free tool · no sign-up · works with any laser

Christmas Ball Name Ornaments

Make alphabet baubles with engraved names. Type a list and prepare the whole batch for laser cutting.

Vector

Vector: Type a list of names. I’ll match each one to its initial and fit the name on the plaque.

Separate names with commas or line breaks.

Name font

Hanger

Ball width

Measured across the widest part of the ball.

How to use it

  1. Paste your list. Add up to 200 names, separated by commas, line breaks, or both. Amelia gets an A, David gets a D, and Thomas gets a T.
  2. Pick the font and hanger. Use Name font for the engraving on the plaque. Choose a Hanger to change the shape at the top of every ornament in the batch.
  3. Set the ball width. Pick a preset or enter an exact width in Advanced settings. Turn on Include a solid back for a two-layer ornament and choose a color to preview through the cutouts.
  4. Review the names. Select a name under Ornament to check its spelling and size in the preview. Open Cut parts to see the pieces that will be cut for that ornament.
  5. Set your sheet and download. Choose your sheet or work area in Advanced settings. Download SVG or DXF and confirm the sheet dimensions when prompted.

Before you cut

  • Check the size after import. Compare the width of the ball in your laser software with Ball width. Make sure the whole ornament, including the hanger, fits inside the working area.
  • Assign the operations. In SVG, use the black filled names for engraving and the red outlines for cutting. In DXF, set ENGRAVE to Fill and CUT to Line. Run the engraving first so the ornament stays in place.
  • Test the longest name. Check it at actual size. If the engraving is too small to read, try a larger ball width or a different font. Cut and engrave one sample on the same stock before running the batch.
  • Line up the two layers. If you added a solid back, dry-fit the front and backing and check that the hanging holes align. For the previewed finish, paint the face of the backing that shows through the cutouts, then let it dry before assembly.

FAQ

Which names are supported?

Start each name with a Latin letter. Élodie gets the E ornament and keeps the accent in the engraving if the selected font supports it. Hyphens, spaces and apostrophes inside a name stay with that name. A repeated name makes another ornament.

Does changing the font change the large letter?

The font changes the engraved name on the plaque. The large cutout letter comes from the CutCatVector A–Z designs and is chosen from the first letter of each name.

Is Ball width the same as overall height?

Ball width is measured across the widest part of the round body. The overall height includes the hanger and changes with the hanger style. The dimensions below the preview show the selected ornament’s full width and height.

How big is the hanging hole?

The round-hole hangers have a 5 mm opening at every ball width. Original slot keeps the elongated opening from the source design. Check the fit with the cord or ribbon you plan to use on a sample.

How does the solid back work?

Include a solid back adds a separate piece for each ornament. Its hanger follows the front piece. Back color previews the painted face seen through the cutouts. The color is for preview only, and the file includes the backing outline as a cut path.

Why did I get a ZIP?

The tool packs the pieces into the sheet size or work area you selected. If the batch needs multiple sheets, the ZIP contains one SVG or DXF per sheet. Unzip it and open one sheet file at a time.

Why is the download button unavailable?

Check the messages above the download buttons. A name may start with an unsupported character or contain characters the selected font cannot draw. If a piece is too large for the selected sheet, choose a smaller ball width or a larger sheet that your laser can handle.

Which material should I use?

Try 3 mm birch plywood for a natural wood finish. Choose settings for your stock and laser, then test a sample to check that the name is readable and the small cutouts release cleanly.

How do I engrave an alphabet bauble?

Use a fill engraving operation for the name on the plaque and run it before cutting. Cut the inner openings before the outside contour so the ornament stays in place while you cut the details.

Can I sell ornaments made with this tool?

Yes. You may sell the physical ornaments you make. See Terms of Use for the rules on sharing and selling the design files.

Do I need an account?

You can create and download your ornaments without signing in. Names are processed in your browser.